Select the filling and capping platform from water type, container, closure, hygiene level and reference output.
Use one approved bottle and closure basis to compare filler configuration and sustained performance.
Water type, container route, neck finish, closure treatment and hygiene basis must share one approved project definition.
| Project route | Core equipment decision | Critical confirmation |
|---|---|---|
| Still water in new PET | Bottle supply or blowing, rinsing, still filling and capping | Water specification, bottle/neck drawings, cap and sustained good output |
| Sparkling water in PET or glass | Pressure-controlled supply and isobaric filling with immediate closure | Carbonation, temperature, container pressure resistance and closure |
| Still water in one-way glass | Depalletizing or unpacking, rinsing, filling, closing and glass-safe transfer | Bottle variation, closure type, breakage control and inspection |
| Returnable large bottle | Preinspection, decapping, validated washing, filling, capping and finished handling | Bottle acceptance, wash procedure, cap route and hygiene release |
Project boundary: Reverse osmosis, ozone, UV and other treatment steps are selected from raw-water evidence and target water requirements—not added universally.
Use one approved bottle and closure basis to compare filler configuration and sustained performance.
The following inputs change the equipment selection and should be recorded before quotation comparison.
Check the upstream condition, the current equipment duty and the downstream handoff as one operating chain.
Final speed, filling accuracy and sanitation scope are confirmed for the selected model and package.
Technical values and supply scope remain subject to the project quotation and signed agreement.
Rinser or bottle infeed
Use one approved bottle and closure basis to compare filler configuration and sustained performance.
Cap feed and discharge conveyor
Use these answers to prepare the project basis. Final equipment and performance require project confirmation.
Start with the product, package, output and site conditions, then provide the topic-specific inputs shown on this page.
Only a reference discussion is possible. A comparable quotation needs an agreed scope, interfaces and commercial boundary.
Not necessarily. Sustained good output depends on the complete route, changeovers, stops, buffer and downstream recovery.
No. This page is planning guidance. Final values are confirmed in the project quotation and signed technical agreement.
Send the beverage, package, output and existing-equipment details for configuration review.