Convert demand, SKU mix, shifts, changeovers, cleaning and expected losses into a common good-output basis.
Calculate required sustained output before choosing individual machine nameplate speeds.
Keep demand, net scheduled time, good output and reference machine speed separate. The calculator uses only values entered by the buyer and applies no hidden efficiency default.
| Calculation layer | Formula | Meaning |
|---|---|---|
| Net scheduled hours | Production days × shifts/day × (hours/shift − planned non-production hours) | Time intentionally available for production |
| Required good BPH | Annual good units ÷ net scheduled hours | Accepted saleable bottles required per running hour |
| Planning reference BPH | Required good BPH ÷ (availability × quality yield) | Initial rate for screening equipment; line balance still requires module checks |
| Pack-rate check | Good BPH ÷ bottles per pack | Required accepted secondary packs per hour |
Project boundary: Do not use a planning result as a performance guarantee. Confirm the reference SKU, changeovers, CIP, stops, rejects and acceptance boundary.
Calculate required sustained output before choosing individual machine nameplate speeds.
The following inputs change the equipment selection and should be recorded before quotation comparison.
Check the upstream condition, the current equipment duty and the downstream handoff as one operating chain.
Capacity is project-specific; nominal machine speed alone does not predict sellable production.
Technical values and supply scope remain subject to the project quotation and signed agreement.
Batch supply rate
Calculate required sustained output before choosing individual machine nameplate speeds.
Packaging sustained output
Use these answers to prepare the project basis. Final equipment and performance require project confirmation.
Start with the product, package, output and site conditions, then provide the topic-specific inputs shown on this page.
Only a reference discussion is possible. A comparable quotation needs an agreed scope, interfaces and commercial boundary.
Not necessarily. Sustained good output depends on the complete route, changeovers, stops, buffer and downstream recovery.
No. This page is planning guidance. Final values are confirmed in the project quotation and signed technical agreement.
Send the beverage, package, output and existing-equipment details for configuration review.