Coordinate crate and bottle sorting, decapping, validated washing, empty-bottle inspection, filling, closure, full-bottle inspection and repacking.
Define the incoming bottle population and acceptance policy before sizing the washer, inspection system, filler and conveyors.
A returnable line must remove unsuitable bottles before filling and prove the cleanliness and integrity of accepted containers.
| Stage | Decision | Evidence |
|---|---|---|
| Sorting and decapping | Bottle family, foreign objects, closures and crates | Incoming audit and reject policy |
| Bottle washing | Soil load, chemistry, temperature and rinse verification | Approved cleaning program |
| Empty-bottle inspection | Residual liquid, damage and contamination checks | Defect library and challenge plan |
| Filling to repacking | Gentle transfer, closure, full-bottle checks and crate return | Bottle samples, layout and acceptance test |
Project boundary: Washing and inspection criteria must follow the actual bottle pool and applicable local requirements.
Define the incoming bottle population and acceptance policy before sizing the washer, inspection system, filler and conveyors.
The following inputs change the equipment selection and should be recorded before quotation comparison.
Check the upstream condition, the current equipment duty and the downstream handoff as one operating chain.
Returnable-container hygiene and structural acceptance require local rules, representative bottles and a validated operating program.
Technical values and supply scope remain subject to the project quotation and signed agreement.
Crate unloading to bottle washer
Define the incoming bottle population and acceptance policy before sizing the washer, inspection system, filler and conveyors.
Closed-bottle inspection, packing and crate handoff
Use these answers to prepare the project basis. Final equipment and performance require project confirmation.
Start with the product, package, output and site conditions, then provide the topic-specific inputs shown on this page.
Only a reference discussion is possible. A comparable quotation needs an agreed scope, interfaces and commercial boundary.
Not necessarily. Sustained good output depends on the complete route, changeovers, stops, buffer and downstream recovery.
No. This page is planning guidance. Final values are confirmed in the project quotation and signed technical agreement.
Send the beverage, package, output and existing-equipment details for configuration review.